Private Wells and Drinking Water in Florida: Testing, Flooding and Disinfection Guide
A practical guide for Florida households that drink water from a private well: what to test, how often, what to do after a flood, how shock chlorination works, and who issues well permits.
Quick answer
If your home uses a private well, you are responsible for checking that the water is safe. The Florida Department of Health strongly recommends testing well water for bacteria and nitrate at least once a year, and says most homeowners should test for lead every three years. Your county health department is the local expert: it can explain how to collect a sample, help read your results, and recommend next steps.
If flood water reaches your well, or the water suddenly looks, smells, or tastes different, use water from a known safe source for drinking, cooking and brushing teeth until testing and your health department confirm the well is safe. Boiling and chlorine disinfection kill germs but do not remove fuel, nitrate or other chemical contamination. Boiling can concentrate nitrate.
Who this applies to
This guide is for households served by their own private drinking water well. Florida has no requirement for routine sampling of private home wells, and the state does not require well sampling when a home with a well is sold. The Department of Health still recommends testing for coliform bacteria, nitrate, and lead when buying or selling a home with a well.
Some wells are regulated differently. According to the Department of Health, a well can be treated as a public water system rather than a private well if it serves two or more rental residences, a day care, group home, nursing home, or assisted living facility, or a business. Owners of those systems must do routine testing and maintenance. Some county health departments also enforce local testing rules for newly built or repaired wells, including Brevard, Broward, Citrus, Duval, Flagler, Highlands, Hillsborough, Osceola, Palm Beach, Pinellas, Sarasota, and Volusia counties.
What to test and how often
- Bacteria (total coliform and E. coli): at least once a year, and any time the water's taste, odor, or appearance changes. Coliform bacteria can indicate contamination; ask the laboratory or county health department to interpret the result. E. coli or fecal coliform signals a more serious health risk. Use safe alternative water and follow the health department’s instructions about drinking, cooking and bathing.
- Nitrate: at least once a year. You cannot see or taste nitrate, so water that tastes fine can still contain it.
- Lead: about every three years for most homes.
- Other contaminants: depending on nearby land use, your county health department may recommend tests for other substances, such as certain chemicals or naturally occurring radiological contaminants. The Department of Health notes that some toxic-substance testing may be free.
- After work on the system: test after well or pump repairs, new plumbing, or disinfection, before using the water for drinking or cooking.
How to get your well water tested
You have three main options. First, your county health department can provide a sampling kit and explain how to collect the sample yourself; the Department of Health says this typically costs about $20 to $30 per sample, and in some counties staff can collect the sample at your home for an added visit fee. Second, the state Bureau of Public Health Laboratories in Jacksonville and Miami tests for E. coli and coliforms, using form DH655, with results in about 48 hours. Third, you can use a private laboratory certified by the state; the Department of Health suggests calling several, since not every lab offers every test.
- Pick up a kit from the county health department or the lab, and follow its instructions exactly.
- For the state lab, run the water at least five minutes, keep your hands out of the stream, and collect at least 100 mL.
- Keep the sample cold (below 50°F) on ice in a cooler, and deliver it the same day it is collected.
- Check delivery hours before you collect. The state lab lists weekday hours and an earlier Friday cutoff.
- Ask your county health department to help interpret the results and recommend fixes.
If your well floods
Use bottled water or another known safe supply if floodwater reaches the well, its appearance or taste changes, or you are unsure whether it was affected. Ask your county health department which tests are needed and whether the well and plumbing need disinfection. Keep away from flooded electrical equipment and have damaged equipment checked by a qualified professional.
For microbial contamination only, Florida Department of Health guidance calls for a rolling boil for at least one minute, followed by cooling, or bottled water. If fuel or chemical contamination is suspected, do not rely on boiling or chlorine. They cannot make chemically contaminated water safe. Do not assume the well is safe when the flood recedes; follow testing and clearance instructions before returning to normal use.
Disinfecting a well safely
Disinfection may be needed after bacterial contamination, flooding, repairs or an extended shutdown. First ask your county health department or a licensed well contractor whether disinfection is appropriate for your well and what caused the contamination. It cannot correct damaged construction or remove nitrate, fuel, pesticides or other chemicals.
The Department of Health’s full well-disinfection instructions explain which well types a homeowner may treat, electrical precautions, treatment-device preparation, bleach strengths and quantities, contact time, flushing and testing. The method depends on the well’s construction, diameter and water depth; do not guess the dose or substitute a short checklist for those instructions.
- Use a licensed well contractor or pump installer for well types outside the homeowner procedure, damaged systems, or any work you cannot safely perform.
- Arrange safe alternative water for the treatment period and until the required follow-up testing is satisfactory.
- Ask how to handle filters, softeners, water heaters and wastewater before treatment.
- Keep the laboratory results and follow the health department’s instructions if bacteria return.
Nitrate and infants
Nitrate comes from fertilizer, plants, and animal or human waste. Ask your laboratory to interpret the nitrate result against the drinking-water standard and confirm the units used on your report. Infants under six months are most at risk: water or formula with nitrate above the drinking-water standard can cause methemoglobinemia, often called blue baby syndrome. The Department of Health says infants under one year should not drink water above the standard.
Boiling does not remove nitrate; it can actually increase the concentration. If a baby's skin looks bluish or brownish-blue, call 911 immediately. High nitrate can also be a sign that bacteria, viruses, or pesticides are reaching the well, so ask your county health department what else to test.
Well construction, repair and permits
According to the Department of Health, building, repairing, or abandoning a drinking water well is typically overseen by Florida's five water management districts, under statewide rules in Chapter 62-532 of the Florida Administrative Code and each district's own well rules. Some districts have delegated permitting to county health departments or other local agencies. The Department of Health lists 22 county health departments that run well permitting, including Miami-Dade, Orange, Palm Beach, Broward, Volusia, and Sarasota.
Before drilling or major repair work, use the Department of Health's well permitting agency map or list to find the agency for your address, and ask whether a permit is needed. Hire a licensed well contractor, and keep the permit, well completion records, and test results with your property papers.
Where to get help
- Your county health department: sampling kits, results, and local rules. Use the Department of Health's county location finder.
- Florida Department of Health, Water Programs: 850-245-4240, as printed on the private well and flooded well pages.
- State public health laboratory: the well water testing page lists 904-791-1600 for emergency testing outside normal hours.
- Your water management district or delegated county: well permits and licensed contractor questions.
Be cautious of door-to-door sellers who offer a free water test and then push an expensive treatment system. Get results from a state-certified lab and ask your county health department before you buy equipment.
Official sources and current guidance
Reviewed November 20, 2026. These links control if a program’s rules or a deadline change.
- Florida Department of Health — Private Well Water Testing
- Florida Department of Health, Bureau of Public Health Laboratories — Well Water Testing
- Florida Department of Health — What Should I Do if My Well Is Flooded? (PDF)
- Florida Department of Health — Well Disinfection (PDF)
- Florida Department of Health — Nitrates in Private Drinking Water Wells (PDF)
- Florida Department of Health — Well Construction in Florida
THIS IS FLORIDA is an independent informational resource and is not affiliated with a Florida government agency. Confirm current details with the responsible agency before acting.