Florida Information · Learning Center

TM 10-3530-202-24 Sewing Machines for Parachute Repair | THIS IS FLORIDA

A U.S. Army maintenance manual for several Singer industrial sewing machines: service on receipt, lubrication, preventive maintenance, troubleshooting and repair.

Official-source review: November 21, 2026 · Independent Florida guide

Florida information in plain text. No need to ask AI.

Important: Unplug a sewing machine before cleaning, oiling or adjusting it; motors run on mains voltage. Old manuals teach fundamentals only.

Quick facts

What it covers

The scope paragraph covers organizational and field maintenance of Singer models 112W116, 131W113, 7-33, 97-10, 17W15, 55-5 and 111W155, and Change 1 adds model 111W151. Chapter 1 is the introduction, and Chapter 2 covers service upon receipt, including removing preservative compound before use.

Chapter 3 covers maintenance: tools and equipment, lubrication, preventive maintenance services, troubleshooting of common troubles, and repair of assemblies such as thread tension assemblies, hooks, feed dogs, needle bars and shuttles. Appendix II is a maintenance allocation chart showing which repairs are done at each level, including work on electric motors and fittings.

How to use it

Find the sections for the model on your machine's nameplate, then read the lubrication and preventive maintenance sections before any repair.

Use the troubleshooting section to match a symptom, such as skipped stitches or thread breakage, to the likely cause before taking anything apart.

Canvas, sail and upholstery shops near the coast often run older industrial machines. Florida's humidity and salt air rust bare steel quickly, so wipe tools and machines dry and keep a light coat of oil on them.

License and how to get it

This manual is a U.S. government work. The Internet Archive copy, scanned from a University of Virginia library copy, is marked Public Domain Mark 1.0. Read it online or download the PDF from the page below.

Safety and currency note

Repair manuals are for learning. Old manuals teach fundamentals; check current practice, codes and the manufacturer's instructions.

Unplug the machine before cleaning, oiling, changing needles or adjusting timing. Keep fingers clear of the needle, and replace frayed motor cords. Mains and high voltage can kill, and capacitors can hold a charge after power is off. Florida home wiring needs the current NEC and Florida Building Code, permits and a licensed electrician where required.

Official source

Reviewed November 21, 2026. The official page below controls if the license, contents or instructions change.

  1. Internet Archive: TM 10-3530-202-24 Sewing Machines for the Repair of Parachutes

THIS IS FLORIDA is an independent informational resource and is not affiliated with the authors, publishers or projects named on this page. Confirm current details at the official source before acting.