Florida Information · Learning Center

U.S. Navy Underwater Cutting and Welding Manual | THIS IS FLORIDA

The Navy's salvage manual for cutting and welding underwater: oxygen-arc and exothermic cutting, wet shielded metal-arc welding, crack repair with patches, equipment and safety.

Official-source review: November 21, 2026 · Independent Florida guide

Florida information in plain text. No need to ask AI.

Important: Underwater cutting and welding is for trained commercial or military divers only; electric shock and trapped gas explosions can kill. Old manuals teach fundamentals only.

Quick facts

What it covers

The foreword says salvage, harbor clearance and wreck removal often require extensive underwater cutting and welding, and that divers get only the basics in school and must practice to qualify. Chapter 1 gives overviews of cutting and welding. Chapter 2 covers underwater cutting: oxygen-arc cutting with steel-tubular electrodes, exothermic electrodes with troubleshooting and post-dive maintenance, a cable-type exothermic cutting tool, and shielded metal-arc cutting.

Chapter 3 covers underwater welding: cofferdams and mini-habitats, wet welding, shipbuilding materials, electrodes and polarity, conditions adverse to welding, fillet weld strength, surface cleaning, joint fit-up, welding in each position, thin plates, and repairing small cracks with rectangular or circular patches. Chapter 4 covers power supplies, polarity tests, safety switches, cables and torches. Appendices cover references, metric conversion, a bibliography, a detailed safety appendix, and exceptional situations.

How to use it

Read Appendix D, Safety in Underwater Cutting and Welding, first. It explains explosive gases, electricity underwater, safety switches, compressed gases and diving dress, and shows why this work is tightly controlled.

Welding students can study the fillet weld, joint fit-up and crack-patching sections to understand weld defects and repair planning, which carry over to welding in air.

Florida has commercial diving schools and marine construction work. Treat this manual as background reading; actual underwater work needs certified training and a dive team.

License and how to get it

This NAVSEA manual is a U.S. government work. Its title page carries Distribution Statement A: approved for public release; distribution is unlimited. Archive.org lets you read it online, search the full text, or download a PDF or plain-text copy, with no account needed.

Safety and currency note

Repair manuals are for learning. Old manuals teach fundamentals; check current practice, codes and the manufacturer's instructions.

Welding and cutting give off toxic fumes and can cause burns, eye injury and fires. Use ventilation, a proper helmet, gloves and a fire watch, and get hands-on training before you strike an arc or light a torch.

Never attempt underwater cutting or welding without commercial or military dive training, a dive supervisor and the proper equipment. Gas pockets formed during cutting can explode. Boating and diving in Florida waters fall under U.S. Coast Guard and FWC rules.

Official source

Reviewed November 21, 2026. The official page below controls if the license, contents or instructions change.

  1. Internet Archive: U.S. Navy Underwater Cutting and Welding Manual

THIS IS FLORIDA is an independent informational resource and is not affiliated with the authors, publishers or projects named on this page. Confirm current details at the official source before acting.