NASA Workmanship Standards (Pictorial Reference) | THIS IS FLORIDA
NASA Johnson Space Center’s full-color pictorial reference of acceptable and unacceptable wiring, soldering and assembly work.
Florida information in plain text. No need to ask AI.
Quick facts
- Title: NASA Workmanship Standards, an inspectors pictorial reference
- Publisher: National Aeronautics and Space Administration, Johnson Space Center, Houston, Texas
- Year: Released 03.31.2000; Revision B dated 07.03.2002, per the scanned pages
- Subject: Wiring, soldering, assembly and inspection
- Who it suits: Electronics assembly, cable and harness, and quality inspection trainees
- License: Public Domain Mark 1.0, as shown on the archive.org item page
What it covers
The introduction says the reference gives full-color visual examples of acceptance and rejection criteria for the design, manufacture and inspection of electrical and electronic equipment for high-reliability and space flight use, and that it is a reference-only companion to the NASA-STD-8739 series of workmanship requirements.
Each example is classed as Preferred, Mandatory, Acceptable or Unacceptable. Sections in the scanned text include wire preparation, crimped terminations, through-hole soldering, surface mount technology, printed wiring boards, cable and harness, conformal coating and staking, polymeric systems, fiber optics and electrostatic discharge.
How to use it
Self-study: compare your own solder joints and crimps to the photos, one section at a time. The picture-by-picture format makes it easy to see what good work looks like.
Job training: inspectors and assemblers can use it as a visual study aid. Your employer’s required standard still controls on the job.
License and how to get it
The archive.org item page shows Public Domain Mark 1.0. It is free to read at the official archive.org item linked below. The document itself says it shall not be rewritten or reissued in any form not approved by NASA, so THIS IS FLORIDA links to the source and does not host or rewrite a copy.
Electronics safety note
Safety: Capacitors, CRT and microwave oven high-voltage parts can be lethal until discharged. Old wiring books are fundamentals only. Florida mains work needs current NEC code, permits and a licensed electrician where required.
Currency and dated material
Currency: this is a 2000 to 2002 reference. Check the current NASA-STD-8739 documents for today’s requirements.
Static safety: follow the ESD section when handling boards, and never work on powered equipment.
Official source
Opened and reviewed November 21, 2026. The source page controls if its license or contents change.
THIS IS FLORIDA is an independent informational resource and is not affiliated with the publisher of this work or with a Florida government agency. Confirm current details with the source before relying on them.