Florida Information · Learning Center

NASA Requirements for Soldered Electrical Connections (NHB 5300.4(3A-2)) | THIS IS FLORIDA

NASA’s 1992 handbook of hand and wave soldering requirements for reliable electrical connections on flight hardware.

Official-source review: November 21, 2026 · Independent Florida guide

Florida information in plain text. No need to ask AI.

Important: This is a free learning resource, not job certification or a license to do electrical work. Capacitors, CRT and microwave oven high-voltage parts can be lethal until discharged. Old wiring books are fundamentals only. Florida mains work needs current NEC code, permits and a licensed electrician where required. Read the book or course at its official source; this page does not host a copy.

Quick facts

What it covers

The NASA Technical Reports Server summary says the publication applies to NASA programs involving solder connections for flight hardware, mission essential support equipment and their elements. It sets forth hand and wave soldering requirements for reliable electrical connections, with the physical integrity of solder connections as the prime consideration.

The summary also notes that special requirements may exist, and that approved design documentation takes precedence over conflicting parts of the handbook. NTRS lists the document as 19930003486, accession number 93N12674, in the Electronics and Electrical Engineering subject category.

How to use it

Self-study: read it alongside hands-on soldering practice on scrap boards. It shows how a high-reliability shop thinks about every joint, which raises the quality of any hobby or repair work.

Job training: Florida’s Space Coast has aerospace and defense employers. Knowing how NASA framed soldering requirements is good background before formal workmanship training on the standard your employer uses.

License and how to get it

NTRS shows Copyright: Work of the US Gov. Public Use Permitted, and Distribution Limits: Public. It is free to read at the official NTRS page linked below. THIS IS FLORIDA links to the source and does not host a copy.

Electronics safety note

Safety: Capacitors, CRT and microwave oven high-voltage parts can be lethal until discharged. Old wiring books are fundamentals only. Florida mains work needs current NEC code, permits and a licensed electrician where required.

Currency and dated material

Currency: this is a 1992 handbook. The NASA workmanship pictorial reference refers to the NASA-STD-8739 series as NASA’s workmanship standard, so check the current standard before using any requirement for real work.

Soldering safety: work with ventilation, wash hands after handling solder, and unplug and discharge equipment before soldering on it.

Official source

Opened and reviewed November 21, 2026. The source page controls if its license or contents change.

  1. NASA Technical Reports Server: Requirements for soldered electrical connections

THIS IS FLORIDA is an independent informational resource and is not affiliated with the publisher of this work or with a Florida government agency. Confirm current details with the source before relying on them.