Florida Information · Learning Center

Carpentry (1916) | THIS IS FLORIDA

A 1916 carpentry textbook for apprentices and trade students, known for its step-by-step roof framing chapters on common, hip, valley and jack rafters.

Official-source review: November 21, 2026 · Independent Florida guide

Florida information in plain text. No need to ask AI.

Important: Structural carpentry in Florida must meet the Florida Building Code, including wind-resistant roof connections that this 1916 book does not cover. Old manuals teach fundamentals only.

Quick facts

What it covers

The preface says the book is meant for apprentices, vocational and trade school students and manual training students, and calls it an elementary treatise of the essentials of carpentry. Chapter I covers foundations, from laying out and grade lines to concrete forms and waterproofing. Chapter II covers the main frame: sills and girders, bridging, trimmers and headers, walls, partitions and openings.

Chapter III covers roof framing for a square-cornered building: common, hip, valley and jack rafters, plumb, seat and side cuts, and rafter lengths, using arithmetic only. Chapter IV generalizes roof framing to octagonal and other polygonal roofs using trigonometry, which the appendix explains for beginners. Chapter V covers sheathing, cornices, shingling and siding, Chapter VI interior finish, stairs and hanging doors, and Chapter VII estimating.

How to use it

Work Chapter III with a framing square and scrap lumber to learn to lay out and cut a common rafter, then a hip rafter.

The preface suggests that readers who only need square-cornered buildings can stop after Chapter III. Chapter IV and the appendix suit students who want the math.

Modern Florida framing adds hurricane straps, engineered trusses and nailing schedules; learn those from current code and an apprenticeship.

License and how to get it

It was published in the United States in 1916, so it is in the public domain in the U.S. The Internet Archive copy is a scan of the Cornell University Library original, whose note says there are no known U.S. copyright restrictions. THIS IS FLORIDA links to it and does not host a copy.

Safety and currency note

Repair manuals are for learning. Old manuals teach fundamentals; check current practice, codes and the manufacturer's instructions.

Structural carpentry in Florida must meet the Florida Building Code, and many jobs need a permit. Wear eye and hearing protection, keep machine guards in place and control wood dust.

Roof work is a fall hazard: use fall protection, stay off wet or steep roofs, and keep clear of power lines. Reroofing and structural roof repairs in Florida must meet the Florida Building Code, and your local building department can tell you which permits apply.

Official source

Reviewed November 21, 2026. The official page below controls if the license, contents or instructions change.

  1. Internet Archive: Carpentry (1916), Cornell University Library scan

THIS IS FLORIDA is an independent informational resource and is not affiliated with the authors, publishers or projects named on this page. Confirm current details at the official source before acting.