THIS IS FLORIDA · FLORIDA GUIDE

Florida Private Wells: Testing, Flood Contamination and Routine Care

If your Florida home uses a private well, you are responsible for monitoring its water. A well can be contaminated without a change in color, taste, or odor, and flooding can create an urgent risk.

Last reviewed: November 19, 2026 · Coverage: Florida statewide, with local and provider-specific differences noted.

Important: General information, not legal, insurance, medical, tax, or financial advice. Use the official sources linked below and confirm current rules before acting. Availability, coverage, eligibility, fees, and local processes can change.

Annual testing and what it checks

The Florida Department of Health strongly recommends testing private well water for bacteria and nitrate at least once each year. A county health department can explain sample collection and testing options; state-certified laboratories may offer additional tests. Ask whether your local area recommends testing for other contaminants based on nearby land uses, geology, or known contamination.

Coliform or E. coli testing is not the same as testing for nitrate, lead, arsenic, saltwater intrusion, pesticides, or every possible chemical. Ask the laboratory exactly which analytes the test includes and how to collect, transport, and refrigerate the sample. A sample collected incorrectly may produce misleading results.

After floodwater reaches a well

If floodwater enters or surrounds a wellhead, or you are uncertain whether the well was affected, do not assume the water is safe because it looks clear. Follow county health department instructions. Use bottled water or boil water as directed for drinking, cooking, brushing teeth, washing dishes, and other consumption uses until testing and any required disinfection are complete.

Do not open electrical equipment or handle a submerged pump while power is on. Have a qualified well contractor or electrician inspect the pump, wiring, pressure tank, and wellhead if they were flooded. A well may need disinfection and a follow-up test. The local health department can advise what procedure is appropriate and when to resume using the water.

Collecting a sample correctly

  1. Call your county health department or certified lab before collecting a sample and get its approved bottle and instructions.
  2. Choose the correct faucet and remove any attachments only as the lab directs.
  3. Do not rinse a sterile bottle unless instructions say to; avoid touching its inside or cap.
  4. Record the address, well, date, and requested tests. Deliver the sample within the lab’s time and temperature requirements.
  5. Keep the written results and ask the health department to explain any positive or elevated finding.

Florida DOH identifies Jacksonville and Miami public health laboratories for certain testing and provides a certified-lab search for other services. Availability, analytes, cost, and turnaround can vary. Call before driving a sample to a lab.

Routine well and septic-system care

Keep the well cap, casing, and electrical connections secure and above surrounding grade where required. Direct stormwater away from the wellhead. Do not store fuel, pesticides, fertilizer, paint, or solvents near the well. Maintain required distances from septic tanks, drainfields, animal areas, and chemical storage; permit rules and setbacks depend on the system and local requirements.

Keep records of well construction, pump and filter service, disinfection, water tests, and nearby septic work. If you install a new treatment device, test the water afterward to confirm it addresses the contaminant and maintain the device according to its service schedule.

If results are abnormal

Use the health department or laboratory’s advice to choose next steps. Do not try to solve a positive bacteria result by adding an arbitrary amount of bleach. The correct procedure depends on the well, plumbing, and test results; too little may fail, and too much can damage equipment or create unsafe water.

For nitrate or chemical concerns, boiling does not remove the contaminant and can concentrate some substances as water evaporates. Use a safe alternate supply and contact public health officials for instructions. If household members develop severe symptoms after drinking well water, seek medical care and tell clinicians about the possible exposure.

Official sources and where to get help

Keep dated copies of applications, policies, estimates, notices, inspection reports, and agency responses. If a deadline, safety issue, or major financial decision is involved, contact the responsible agency or a qualified Florida professional promptly.

This Is Florida is an independent information directory and is not affiliated with any government agency or service provider.